How To Fix Aircon Circuit Breaker Tripped Issue? We depend heavily on our Aircon units due to the hot and humid climate of the areas where we reside. However, these devices start malfunctioning from time to time causing us great problems and headaches. This issue might arise if the aircon unit trips your circuit breaker, and if it is so, don’t turn it on. There are many causes that might result in circuit breaks and here we have mentioned some ways to fix them.
1. Reset the circuit breaker of your Aircon device
If the aircon circuit breaker goes on tripping, then something must be wrong. Try to reset it and see whether the unit operates normally. While resetting a circuit breaker make sure that it’s in the OFF position at first, and then switch it on. Wait and observe its action after operating it for several minutes. If it trips once you turn on the Aircon unit, things have already gone out of your control. Leave the circuit breaker and get in touch with an experienced HVAC technician. The problem relates to wiring, and you cannot do anything about that on your own.
If it does not trip once again, then it must have been a power surge from something like a thunderstorm. Take a look at the other equipment in your house to make sure that it is only a 1-time incident. If the “RESET CLOCK” light of the microwave is blinking, and the AC unit isn’t functioning, it implies no problem. Reset it to see what is happening. In case the circuit breaker trips once more, then continue with the next step.
2. Verify the AC filter
There are many reasons to replace the AC filter. One of them happens to be a clogged AC filter that might lead the unit’s circuit breaker to trip. If there is a clogged filter, there is an interruption of the airflow to the device. This will make the unit work harder and longer as compared to if it were an unclogged filter. This might overheat the unit and the circuit breaker might trip as a result. The unit has to work harder so as to cool you in whatever way possible.
3. Verify the condenser coil
It is also essential to verify the condenser coil for identical reasons as the first step. The unit uses a fan for blowing the external air over the condenser coil which lies outside the house. Ensure that this fan does not contain any debris, leaves, and dirt. If it is not so, use your garden hose to clean it comprehensively. Cleaning the coils will make it easy for the Aircon device to function smoothly.
4. Low refrigerant might be a factor
Unfortunately, you cannot do anything about this on your own if a low refrigerant is a cause. This type of condition will make the unit function harder than before. A tripped circuit breaker is an indication of this, and therefore, you must make sure to check the refrigerant levels. Perform a vacuum check on the system as well if the necessity arises.
5. Look for loose wiring and aging parts
The wires within the unit are going to expand and contract with the change of seasons over time. Depending on your location, the average lifespan of the AC unit is about 9 to 18 years. For instance, an Aircon unit in Bozeman is not used that much as compared to the one in California. However, an expert has to handle this issue too.
How To Fix Aircon Circuit Breaker Tripped Issue? –
Conclusion:
While troubleshooting the AC device, try to keep everything simple. Always start with the most common issues and then go to the complicated ones if needed. Be patient even though the device goes on tripping, and rule out the likely causes. If all of your efforts end in failure, do not hesitate to take the help of a certified professional. Although you can handle most of the problems on your own, at times you have no other way out. There are lots of mechanics in your close vicinity and make sure that you choose a certified one. Also, look at their experiences and how long they have been servicing in the area. If needed, go online and look at the reviews from the previous customers as well. Taking recommendations from your known persons will not be a bad idea as well.